Filastik Pallet Processing da Ƙirƙirar Matakai

Akwatunan pallet na filastik suna da ƙarfi kuma suna dawwama, kuma matakin samar da su yana haɓaka koyaushe.Yanzu ana amfani da su sosai a cikin samfuran marasa nauyi.Har ila yau, kwantena na filastik suna da halaye na ƙarfin matsawa mai ƙarfi, kyawawan kaddarorin ƙarfi, juriya na acid da alkali, da saurin yashwa, kuma sun sami tagomashin yawancin masu amfani.Don haka kun san yadda ake sarrafa wannan samfurin da kuma samar da shi?Na gaba, bari mu kalli matakan sarrafawa da gyare-gyaren wannan samfur.

Na farko shine zaɓin kayan.A halin yanzu, babban abu shine polyethylene, kuma samfuran da aka gama da wannan kayan suna da juriya mai ƙarfi.Don haka, akwatunan pallet na filastik na iya jure tasirin sanya abubuwa masu nauyi kuma suna da kyakkyawar daidaita yanayin muhalli.Ko da a ƙananan zafin jiki, har yanzu yana iya kula da kyakkyawan yanayin kuma ya guje wa tsufa da fatattaka.A lokaci guda kuma, saboda ƙarancin sinadarai masu ƙarfi, yana da kyakkyawan aiki a cikin rufi.

Mataki na gaba shine amfani da mold don matsawa.A halin yanzu, babbar hanyar ita ce a yi amfani da kayan ƙulla ƙura don matsawa kai tsaye, sa'an nan kuma a yi amfani da resin a cikin pallet, sa'an nan kuma zazzage kwandon da zafin jiki mai zafi, sa'an nan kuma sanya shi a cikin mold.A cikin wannan tsari, Gudun dumama yana buƙatar kulawa da hankali, wanda yawanci ana cika shi ta hanyar cika filastik.

Sai kuma tsarin gyaran allura.Babban tsari shine zubar da kayan a cikin yanayin narkakkar daga ƙofa na mold.Bayan haka, zai cika fim na ciki ta hanyar mai gudu, ta hanyar tsarin sanyaya da ya dace sannan kuma ya tsara shi, sa'an nan kuma yin gyare-gyare a kan samfurin.magance.Bayan irin wannan aiki, ana iya yin kwandon filastik na farko don sauƙaƙe mataki na gaba na sarrafawa.

A ƙarshe, ana buƙatar sarrafa gyare-gyare.A zahirin samarwa, kwantena filastik galibi suna amfani da hanyar gyare-gyaren lokaci ɗaya.Saboda saurin gyare-gyaren yana da sauri, abubuwan da ake buƙata don ƙwarewar aiki na ma'aikata suna da tsauri.Bugu da ƙari, bayan an kafa shi, ana buƙatar bincika samfurin don tabbatar da ingancin samfurin da aka gama.